article numbers
HWS-security screw cap "ADS"
| for GL 14 | 1 010 214 |
| for GL 18 | 1 010 218 |
| for GL 25 | 1 010 225 |
| for GL 32 | 1 010 232 |
| for GL 45 | 1 010 245 |
HWS-unscrew seal
| with runout injector | 1 019 001 |
| with screw threat application | 1 019 002 |
| with Luer-connection | 1 019 003 |
|
|
 Screw Thread Units
HWS-laboratory connection "MAXI"
enables the fitting of tubes with a diameter from
8 or 10 mm for the main used screw threat dimensions GL 14
complete with screw threat application "SILPET"
|
|
|
|
HWS-screw threat application "SILPET"
by the combination of PTFE(to the reaction side) and silicone(pressure element) fast and save screwing
of rod and tubes on GL-threats, PTFE (TFM) highly flexible, free of pores, silicone, permanent elastic
aging- and ultra violet rays-resistant
working temperature -50…+260°C
|
HWS-security screw cap "ADS"
from fibre glass boosted PPS, equipped with inserted silicone unit, which avoids unintended unscrewing
fitting to application "SILPET"
working temperature -50°C..+260°C
|
|
|
|
HWS-unscrew seal
screw threat dimensions GL14 in 3 types
- with run out injector*
- with screw threat application for hoses
- with Luer-connections for injections
* with adjustment of the runout direction
|
|
 |
| article numbers |
HWS-laboratory connection "MAXI"
| for GL 14 / for 8 mm | 1 264 908 |
| for GL 14 / for 10 mm | 1 264 910 |
HWS-screw threat application "SILPET"
| for GL 14 / for 1,6 mm | 1 264 141 |
| for GL 14 / for 2,0 mm | 1 264 142 |
| for GL 14 / for 3,0 mm | 1 264 143 |
| for GL 14 / for 3,2 mm | 1 264 148 |
| for GL 14 / for 4,0 mm | 1 264 144 |
| for GL 14 / for 6,0 mm | 1 264 146 |
| for GL 18 / for 1,6 mm | 1 264 181 |
| for GL 18 / for 2,0 mm | 1 264 182 |
| for GL 18 / for 3,0 mm | 1 264 183 |
| for GL 18 / for 3,2 mm | 1 264 185 |
| for GL 18 / for 4,0 mm | 1 264 184 |
| for GL 18 / for 6,0 mm | 1 264 186 |
| for GL 18 / for 8,0 mm | 1 264 188 |
| for GL 18 / for 10 mm | 1 264 189 |
| for GL 25 / for 3,0 mm | 1 264 253 |
| for GL 25 / for 4,0 mm | 1 264 254 |
| for GL 25 / for 6,0 mm | 1 264 256 |
| for GL 25 / for 8,0 mm | 1 264 258 |
| for GL 25 / for 10 mm | 1 264 260 |
| for GL 25 / for 12 mm | 1 264 262 |
| for GL 25 / for 14 mm | 1 264 264 |
| for GL 32 / for 8,0 mm | 1 264 328 |
| for GL 32 / for 10 mm | 1 264 330 |
| for GL 32 / for 12 mm | 1 264 332 |
| for GL 32 / for 14 mm | 1 264 334 |
| for GL 32 / for 16 mm | 1 264 336 |
| for GL 32 / for 18 mm | 1 264 338 |
| for GL 32 / for 20 mm | 1 264 340 |
| for GL 45 / for 6,0 mm | 1 264 456 |
| for GL 45 / for 8,0 mm | 1 264 458 |
| for GL 45 / for 10 mm | 1 264 460 |
| for GL 45 / for 12 mm | 1 264 462 |
| for GL 45 / for 14 mm | 1 264 464 |
| for GL 45 / for 16 mm | 1 264 466 |
| for GL 45 / for 18 mm | 1 264 468 |
| for GL 45 / for 20 mm | 1 264 470 |
|
|
